The Magnetic Pulser High Intensity Momentary Time?Variant Pulsed Magnetic Field Generator [MODEL #: MPG2] “First Aid Kit of the Future” as per the research of Dr. Robert (Bob) C. Beck, D.Sc. NEW DESIGN! “The best Magnetic Pulser on. planet Earth!” says Dr. Beck Our design of The Magnetic Pulser is CERTIFIED, APPROVED and Personally ENDORSED by Dr. Robert (Bob) C. Beck, D.Sc. What is "The Magnetic Pulser"? Full Pulser can be found in the research papers published by Dr. Robert (Bob) C. Beck. For background info, look up the original Patent # 5,188,738. The Magnetic Pulser is a professionally designed quality device, thoroughly tested and guaranteed to operate as per the specifications in Dr. Bob Beck's research. The Magnetic Pulser (MPG) is designed to generate an intense (~21,490 Gauss), momentary (~2.5mS) magnetic field. NOTE: Please do not confuse this device with permanent/ceramic magnet therapies, or with the EMR (electro–magnetic radiation) producing devices! Through the principle of induction, this magnetic field creates eddy?currents (tiny electrical micro–currents) in living organic material that contain an electrolyte such as saline. The result is the same as what The Silver Pulser does, only the Magnetic Pulser requires no contact, and can be used to target specific areas. This device for research purposes only. Before using, consult your professional health practitioner or Medical Doctor. Unique Features: A unique circuit design allows the The Magnetic Pulser to operate without the use of a Xenon flashtube as did previous designs allowing for maximum power delivery to the coil. Fully Automatic! The MPG2 will automatically charge and discharge. An internal Digital Counter allows the MPG2 to pulse 64 times automatically. Simply reset the unit to continue. LED light bargraph. A light bargraph consisting of five Green LED lights, illuminates sequentially giving visual indication of the MPG2 charging up. A dual function Red LED light indicates either a count of 64 has been reached, or an overload condition has occurred. Operates from an AC?DC Wall Adapter (included), or from a 12 Volt DC source like a automobile battery. Extremely high power output. Generates ?32 Joules (Watt*Seconds) of energy through the use of a 6000, 330VDC Custom Photoflash Capacitor. This then produces ?21,490 Gauss (?21 kilogauss) magnetic field in the coil. High–Frequency SwitchMode Pulse?Width?Modulated power supply allows for fast charges and a very lightweight unit. Double?insulated practices used throughout to ensure the greatest electrical safety. Coil is completely enclosed in epoxy. No exposed wires or leads. Extremely long capacitor lifetime. We now have a custom photoflash type capacitor designed specifically to our Magnetic Pulser. Expect well over a 1/4 million (250,000) cycles of operation before our custom capacitor requires replacement (at a nominal charge). Compare this with our previous version the MPG1 which has a 85,000 cycle life, or even to photoflash based pulsers that have 5,000 – 10,000 life cycle. Overload Protection. Should an overload or fault condition occur in the charging section, a sensor will limit the current, then eventually shutdown the unit until the fault condition is removed. Fast charging cycle. Unit fully charges in less than 5 seconds. North Magnetic Pole Polarity (?) or South?Seeki nig is clearly identified on one side of pulsing coil. This give the user the choice of applying either North (?) or South (+) pole energy to the site. Compact and lightweight. MPG2 unit weighs 3/4 Lbs. (0.3 Kg.), Magnetic coil weighs I Lb. (0.4 Kg.). Total shipping weight of complete MPG2 with wall adapter weighs ~3 Lbs. (~1.3 Kg.). The Unit: The Magnetic Pulser is housed in an attractive ABS "pc?bone" colored (Pantone "Warm Grey 1") plastic box. A Toggle Switch turns the Magnetic Pulser on and off. A series of Green lights indicates power is available and visually shows unit is charging. When turned on, the Magnetic Pulser will immediately begin to charge up. This takes about 5 seconds. When fully charged, the last Green light will go on briefly, and the unit will immediately discharge the stored energy of the capacitor into the pulsing coil. The Magnetic Pulser will then begin another charge cycle. Should an overload or fault condition occur in the charging section, the MPG2 will shutdown until the fault condition is removed, and a Red indicator light will come on. After 64 pulses, the MPG2 will go into standby mode until a physical reset occurs. This helps prevent continuous operation should the MPG2 be left on unattended. A Red light will illuminate. The Magnetic Pulser is packaged in a lidded cardboard "die?cut mailer" box for easy storage. Electronics: The Magnetic Pulser is designed as per the research by Dr. Bob Beck. We have improved on the design with added features. These changes by no means alter the effectiveness of the unit. Our electronic design is unique and efficient making the unit very reliable and powerful. Early designs required the use of a Xenon flashtube. We've completely re–designed The Magnetic Pulser from the ground up using the latest in electronic components. The result is a very powerful, reliable, rugged device that transfers more energy to the output coil. In addition, we use double?insulation techniques to ensure the greatest in electrical safety. This is of extreme importance! Specifications (as measured on a Tektronics TDS 210 Digital Real–Time Oscilloscope, and Wavetek AD105 Clamp–On Ammeter) Energy Storage Capacitor: 6000, 330 Volts DC Energy Storage: 32 Joules (Watt*Seconds) Typical Peak Charge Voltage: 330 Volts DC Maximum Peak Charge Voltage: 350 Volts DC Maximum Peak Current Discharge into Coil: 115 Amps Pulse Rise Time: <1.8 uS (microseconds) Click here to see the actual waveform. Pulse Duration: ~2.5mS (milliseconds) Click here to see the actual waveform Main Coil Inductance: ~2.3mH (millihenries) Flux Density: 31,050 Ampere*Turns Peak Magnetic Field Output: 21,490 Gauss (~21 kilogauss) Liability Disclaimer to The Magnetic Pulser owner: Please understand that we cannot be responsible for any effects ? good or bad ? believed due to the use of The Magnetic Pulser Please read Dr. Bob Beck's research papers before using this device. This device is for researchers only. Not intended for use on humans. Before using, consult your professional health practitioner or Medical Doctor. Dimensions: The Magnetic Pulser is 5.00" wide x 5.25" long x 2.00" high (12.5 cm wide x 13.25 cm long x 5.0 cm high). Casing is high–impact ABS plastic. Weight of The Magnetic Pulser unit is about 3.0 Lbs. (1.3 Kg.) total. Case is “pc–bone” in colour (Pantone “Warm Grey 1”). Each Magnetic Pulser comes complete with: The Magnetic Pulser unit Operating Manual Additional Documentation for Researchers (which is mailed to you separately) AC?DC Wall Adapter rated at 12VDC @ 1.2 Amps, centre positive. (NOTE: This wall adapter can be used on The Silver Pulser or The Silver Maker unit.) Cardboard “die–cut mailer” Storage Box 1 Year Parts and Labor Warranty To Order Call: 801–785–2711